Blaupunkt DVD35 Car Stereo System User Manual


 
47
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
Random track play – MIX
To play the tracks in the current direc-
tory in random order,
briefly press the 1 MIX button 9.
“MIX ON” and the MIX symbol appear
on the display.
Cancelling MIX
To cancel MIX,
press the 1 MIX button 9 repeat-
edly until “MIX OFF” is displayed.
The MIX symbol disappears.
The Repeat function is automatically
activated, and the display shows the
RPT symbol.
Scanning tracks – SCAN
You can scan (briefly play) all the tracks
on the CD.
Press and hold down the
MENU•OK button 7 for longer
than two seconds.
The next track will then be scanned.
“SCAN” briefly appears on the display.
Notes:
You can set the scanning time.
For further information, please
read the section entitled “Setting
the scanning time” in the “Radio
mode” chapter.
The Scan function cannot be acti-
vated if it is started at the last title
of a directory.
Cancelling SCAN and continuing
listening to a track
Press and hold down the MENU•OK
button 7 for longer than two sec-
onds.
The currently scanned track will then
continue to be played normally.
Repeated playback of individual
tracks or entire directories –
REPEAT
To play the current track repeatedly,
briefly press the 4 RPT button 9.
“REPEAT TRACK” and RPT appear
briefly on the display.
To repeat the whole directory,
press the 4 RPT button 9 again.
“REPEAT DIR” appears briefly on the
display.
Cancelling REPEAT
To stop the current track or current di-
rectory from being repeated,
press the 4 RPT button 9 repeat-
edly until “REPEAT OFF” is dis-
played.
RPT disappears from the display.
REPEAT with the remote control
In CD mode, you can select the
REPEAT mode with the remote control.
Note:
This function is operable only if an
external display is connected.
MP3/WMA MODE
01LongBeachDVD35_gb 11.07.2005, 14:39 Uhr47