Filter
Top Products
53
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
CLOCK time
Displaying the time
You can make the clock time appear
continuously in the bottom part of the
display while any audio source is acti-
vated. For further information, please
read the “Configuring the display” sec-
tions in the relevant chapters.
Setting the clock manually
To set the clock time manually,
➮ press the MENU•OK button 7.
➮ Press the or button 6
repeatedly until “CLOCK MENU”
appears on the display.
➮ Press the MENU•OK button 7.
➮ Press the or button 6
repeatedly until “CLOCK SET”
appears on the display.
➮ Press the MENU•OK button 7.
The time appears on the display. The
hours flash and can be adjusted.
➮ Set the hours using the / but-
tons 6.
Once the hours are set,
➮ press the button 6.
The minutes flash.
➮ Set the minutes using the
/ buttons 6.
➮ Press the MENU•OK button 7
and then the DIS•ESC button 5.
Selecting 12/24-hour clock
mode
➮ Press the MENU•OK button 7.
➮ Press the or button 6
repeatedly until “CLOCK MENU”
appears on the display.
➮ Press the MENU•OK button 7.
➮ Press the or button 6 re-
peatedly until “24 HOUR MODE”
or “12 HOUR MODE” appears on
the display.
➮ Press the or button 6 to
switch between the modes.
When you have finished making your
changes,
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
Displaying the time
continuously when the device is
off and the ignition is on
To display the time when the device is
off and the vehicle ignition is on,
➮ press the MENU•OK button 7.
➮ Press the or button 6
repeatedly until “CLOCK MENU”
appears on the display.
➮ Press the MENU•OK button 7.
CLOCK TIME
01LongBeachDVD35_gb 11.07.2005, 14:39 Uhr53