Filter
Top Products
17
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
Setting the sensitivity of station
seek tuning
You can choose whether the radio
should only tune into stations provid-
ing good reception or whether it can
also tune into those with a weak re-
ception.
➮ Press the MENU•OK button 7.
“TUNER MENU” appears on the dis-
play.
➮ Press the MENU•OK button 7 to
display the tuner menu.
➮ Press the or button 6
repeatedly until “SENS” appears
on the display.
The display shows the currently set
sensitivity level. “SENS HI3” means that
the tuner is set to the highest sensitiv-
ity setting. “SENS LO1” means it is set
to the lowest sensitivity setting.
➮ Set the sensitivity level that you
want using the buttons 6.
When you have finished making your
changes,
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
Note:
You can adjust different sensitivi-
ties for FM and AM.
Storing stations
Storing stations manually
➮ Select the desired memory bank
FM1, FM2, FMT, AM or AMT.
➮ Tune into the station that you
want.
➮ Press and hold down one of the
station buttons 1 - 6 9 for longer
than two seconds to assign the
station to that button.
Storing stations automatically
(Travelstore)
You can automatically store the six
strongest stations in the region. The
stations are stored in the FMT or AMT
memory bank.
Note:
Any stations that were previously
stored in this memory bank are
deleted in the process.
➮ First, select an FM memory bank
for an FM Travelstore or an AM
memory bank for an AM Travel-
store.
➮ Press and hold down the BND•TS
button 4 for longer than two sec-
onds.
The storing procedure begins. “TRAV-
EL STORE PLEASE WAIT” appears
on the display. After the process has
completed, the radio will play the sta-
tion that is stored in memory location
1 of the FMT or AMT memory bank.
RADIO MODE
01LongBeachDVD35_gb 11.07.2005, 14:38 Uhr17