Filter
Top Products
51
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
Random track play (MIX)
To play the tracks on the current CD in
random order,
➮ briefly press the 1 MIX button 9.
“MIX CD” appears briefly and MIX lights
up on the display.
To play the tracks on all inserted CDs
in random order,
➮ briefly press the 1 MIX button 9.
“MIX ALL” appears briefly and MIX
lights up on the display.
Cancelling MIX
➮ Press the 1 MIX button 9 repeat-
edly until “MIX OFF” is displayed.
Scanning all tracks on all CDs
(SCAN)
To scan (briefly play) all the tracks on
all the inserted CDs in ascending or-
der,
➮ press and hold down the
MENU•OK button 7 for longer
than two seconds.
“SCAN” and the selected display mode
appear alternately on the display.
Note:
You can set the scanning time.
For further information, please
read the section entitled “Setting
the scanning time” in the “Radio
mode” chapter.
Stopping SCAN
To stop scanning,
➮ press and hold down the
MENU•OK button 7 for longer
than two seconds.
The currently scanned track will then
continue to be played normally.
Naming CDs
The car sound system allows you to
assign names for up to 30 CDs so that
you can recognise them more easily.
The names can be a maximum of sev-
en characters long.
“CD NAME FULL” will appear on the
display if you try assigning more than
30 names.
Entering/editing CD names
➮ Listen to the CD that you want.
➮ Press the MENU•OK button 7.
➮ Press the or button 6
repeatedly until “VARIOUS
MENU” appears on the display.
➮ Press the MENU•OK button 7.
➮ Press the or button 6
repeatedly until “CD NAME EDIT”
appears on the display.
➮ Press the MENU•OK button 7.
You will now enter editing mode.
If your CD does not have a name yet,
“ABCDEFG” appears on the display.
The currently active text input position
flashes.
CD-CHANGER MODE
01LongBeachDVD35_gb 11.07.2005, 14:39 Uhr51