Filter
Top Products
P-119
QT-6600 Programming Manual
4-3-10 Programming transaction key (free function)
This procedure is used for programming the key located in the list and on the keyboard.
Operation: <PGM3> → 3.Key Feature → 10.Free Function
——— Rec. No. / Function code / Key Descriptor / Parameter
1. Select the record you want to change the program (function code/descriptor/parameter).
You can select the record directly or by pressing function key on the keyboard .
2. Select “Function code”, “Key descriptor” or “Parameter” field by <Arrow keys>.
Or press the function key on the keyboard directly.
3. Programming to the record:
• Free function field:
You can enter function code and the <Yes> key. If you press the <Yes> key directly,
the “Key Assign” screen (refer to the page P-24) is opened.
• Key descriptor field:
When you press the <Yes> key, the character programming keyboard (refer to the
page P-126) is opened.
a. You can enter the character programmed to the transaction key file (character on
receipt).
b. If the record is linked to the keyboard or a list, the character* (actual keytop character
and keytop character in a list window) can be set after step-a.
• Parameter field:
You can enter parameter and the <Yes> key. If you press the <Yes> key directly, the
parameter programming screen of each function is opened.
Free Function
001 0072 CLK#1 00000000000000000001
002 0072 CLK#2 00000000000000000002
003 0072 CLK#3 00000000000000000003
004 0072 CLK#4 00000000000000000004
005 0072 CLK# 00000000000000000000
006 0027 - 00000000000000000000
: