Filter
Top Products
2. ADJUSTMENTS
15
[RGB], [DVI1/2] menu descriptions
*: When inputting VGA, SVGA or XGA, a circle may be displayed as an ellipse because the aspect
ratio differs. In this case, set [DISP MODE] to [NORMAL] on the [RGB], [DVI1], or [DVI2] menus.
A black bar appears on the top and bottom of the picture, but this is normal.
**: If the characters are not clear, adjust [PHASE] and [SHARPNESS].
Menu item Function Setting
H_SIZE (Only for
RGB menu)
Adjust the image size horizontally.
Horizontal size: W (narrow), X (wide)
Depending on in-
put signal
V_SIZE (Only for
RGB menu)
Adjust the image size vertically.
Vertical size: W (narrow), X (wide)
PHASE** (Only
for RGB menu)
Adjust the sample timing so that the flicker disappears and
the text is clear.
1 to 32
BRIGHTNESS Adjust the red, green and blue color level at one time. 1 to 256
CONTRAST Adjust the contrast level.
W (darken), X (brighten)
1 to 64
H_POSITION Move the image position horizontally.
W (leftward), X (rightward)
1 to 99 (RGB),
1 to 50 (DVI1,
DVI2)
V_POSITION Move the image position vertically.
W (upward), X (downward)
1 to 40
R_LEVEL Adjust the red color level.
W (weaken), X (strengthen)
1 to 256
G_LEVEL Adjust the green color level.
W (weaken), X (strengthen)
1 to 256
B_LEVEL Adjust the blue color level.
W (weaken), X (strengthen)
1 to 256
TEMPERATURE Adjust the color temperature.
W (strengthen the red color level),
X (strengthen the blue color level)
5000 to 9300K
(Step is 100.)
B STRETCH Emphasize the black color.
[OFF] (standard), W (weaken), X (strengthen)
[OFF], 1 to 10
W STRETCH Emphasize the white color.
[OFF] (standard), W (weaken), X (strengthen)
[OFF], 1 to 10
DISP MODE* Select the display method.
[FULL]: Show the input signal on entire screen.
[NORMAL]: Show the input signal with original aspect ratio.
[FULL],
[NORMAL]
SHARPNESS** Sharpen the edges horizontally.
W (soften characters and lines),
X (sharpen characters and lines)
1 to 10