Filter
Top Products
2. ADJUSTMENTS
16
2.3 Video Composite Signal Setting (For Non-SO-
LAS)
You can adjust the VIDEO signal from the VIDEO port. The VIDEO signal is also displayed in the
PIP window (see section 3.5).
1. Select the signal to adjust at the DISP selection window.
2. Press the MENU key to show the menu.
3. Press the W or X key to select [VIDEO].
4. Press the S or T key to select the menu item to adjust.
5. Press the W or X key to adjust the setting.
6. Press the MENU key to close the menu.
[VIDEO] menu descriptions
Menu item Function Setting
PIP_SIZE Adjust the size of the picture-in-picture window.
Note: This setting is available when the PIP window is dis-
played.
1 (52 mm x 35
mm) to 10 (285
mm x 194 mm)
CONTRAST Adjust the contrast level.
W (darken), X (brighten)
1 to 64
R_LEVEL Adjust the red color level.
W (weaken), X (strengthen)
1 to 256
G_LEVEL Adjust the green color level.
W (weaken), X (strengthen)
1 to 256
B_LEVEL Adjust the blue color level.
W (weaken), X (strengthen)
1 to 256
TEMPERATURE Adjust the color temperature.
W (strengthen the red color level),
X (strengthen the blue color level)
5000 to 9300K
(Step is 100.)
B STRETCH Emphasize the black color.
[OFF] (standard), W (weaken), X (strengthen)
[OFF], 1 to 10
W STRETCH Emphasize the white color.
[OFF] (standard), W (weaken), X (strengthen)
[OFF], 1 to 10
RGB DVI1 DVI2 VIDEO OSD SYSTEM
PIP_SIZE
CONTRAST
R_LEVEL
G
_LEVEL
B_LEVEL
TEMPERATURE
B STRETCH
W
STRETCH
5
32
128
128
128
7000K
OFF
OFF
(1~10)
(1~64)
(1~256)
(1~256)
(1~256)
(5000K~9300K)
(OFF, 1~10)
(OFF, 1~10)