JVC GET0602-001A Car Video System User Manual


 
44
More about this unit
General
Turning on the power
By pressing SOURCE on the monitor panel, you
can also turn on the power. If the source is ready,
playback starts.
Tuner (FM only)
Storing stations in memory
When SSM is over, received stations are preset in no.
1 (lowest frequency) to no. 6 (highest frequency).
Disc
General
In this manual, words “track” and “file” are
interchangeably used.
This unit can only play back audio CD (CD-DA) files
if different type of audio files (MP3/WMA/WAV) are
recorded on the same disc.
Inserting a disc
When a disc is inserted upside down or has no
playable files, “Cannot play this disc Check the disc”
appears on the screen. Eject the disc.
Ejecting a disc
If “No Disc“ appears after removing a disc, insert a
disc or select another playback source.
If the ejected disc is not removed within 15 seconds,
the disc is automatically inserted again into the
loading slot to protect it from dust.
Playing Recordable/Rewritable discs
This unit can recognize a total of 5 000 files and 250
folders (a maximum of 999 files per folder).
Use only “finalized” discs.
This unit can play back multi-session discs; however,
unclosed sessions will be skipped while playing.
This unit can recognize a total of 25 characters for
file/folder names.
Some discs or files may not be played back due to
their characteristics or recording conditions.
Playing DVD-VR
For details about DVD-VR format and playlist, refer
to the instructions supplied with the recording
equipment.
File playback
Playing DivX files
This unit can play back DivX files with the extension
code <.divx>, <.div>, or <.avi> (regardless of the
letter case—upper/lower).
Audio stream should conform to MP3 or Dolby Digital.
The file encoded in the interlaced scanning mode
may not be played back correctly.
The maximum bit rate for video signals (average) is
4 Mbps.
Playing MPEG1/MPEG2 files
This unit can play back MPEG1/MPEG2 files with the
extension code <.mpg>, <.mpeg>, or <.mod>*.
* <.mod> is an extension code used for the MPEG2 files
recorded by JVC Everio camcorders. The MPEG2 files
with the <.mod> extension code cannot be played
back when stored on a USB mass storage class device.
The stream format should conform to MPEG system/
program stream.
The file format should be MP@ML (Main Profile at
Main Level)/SP@ML (Simple Profile at Main Level)/
MP@LL (Main Profile at Low Level).
Audio streams should conform to MPEG1 Audio
Layer-2 or Dolby Digital.
The maximum bit rate for video signals (average) is
4 Mbps.
EN44-51_KW-AVX726_001A_3.indd 44EN44-51_KW-AVX726_001A_3.indd 44 12/10/08 11:13:04 AM12/10/08 11:13:04 AM