JVC GET0602-001A Car Video System User Manual


 
40
ENGLISH
Using the Bluetooth® devices
For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA200 (not supplied) to the CD
changer jack on the rear of this unit.
Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.
Refer to the list (included in the box) to check the countries where you may use the Bluetooth ® function.
To use a Bluetooth device through the unit (“
Bluetooth PHONE
” and “
Bluetooth AUDIO
”) for the first time,
you need to establish Bluetooth wireless connection between the unit and the device.
Once the connection is established, it is registered in the unit even if you reset your unit. Up to five devices can be
registered in total.
Only one device can be connected at a time for each source (“
Bluetooth PHONE
” and “
Bluetooth AUDIO
”).
Connecting a new Bluetooth device
Registration (Pairing) methods
Use either of the following items in <Bluetooth> menu to register and establish the connection with a device.
• Select “
Bluetooth PHONE
” or “
Bluetooth AUDIO
” as the source to operate <Bluetooth> menu.
Open Make the unit ready to establish a new Bluetooth connection. The connection is established by
operating the Bluetooth device.
Search Make the unit ready to establish a new Bluetooth connection. The connection is established by
operating this unit.
• To register a device using <Open> or <Search>,
28.
• To connect a special device, 29.
• To connect/disconnect/delete a device, 29.
Changing the display information
Bluetooth Information:
If you wish to receive more information about Bluetooth, visit the following JVC web site:
<http://www.jvc.co.jp/english/car/> (English website only).
( 56)
EN38-49_KW-AVX720[EE]_1.indd 40EN38-49_KW-AVX720[EE]_1.indd 40 19/1/09 9:47:09 AM19/1/09 9:47:09 AM