JVC GET0602-001A Car Video System User Manual


 
39EXTERNAL DEVICES
ENGLISH
Continued on the next page
When a call comes in...
The source is changed to “
Bluetooth PHONE
automatically.
When <Auto Answer> is activated...
The unit answers the incoming call automatically.
( 28)
When <Auto Answer> is deactivated...
To answer the incoming call
Press the message displayed on the touch panel.
Press any button on the monitor panel (except
or VOL +/–).
Using the Bluetooth cellular phone
To end the call
Hold the message displayed on the touch panel.
Hold any button on the monitor panel (except
or VOL +/–).
You can adjust the microphone volume, 28.
To make a call, use <Dial Menu>. ( 26)
~ Press [SOURCE], then press [Bluetooth PHONE].
Ÿ Press [ ].
! Press [Bluetooth].
Establish the connection with a device, then make a call (or settings using <Bluetooth>
menu). (
26 – 28)
Name and phone number (if acquired)
FLAT
AM
3:00
SOURCE
Connected Device Name
Status of the device
Signal strength/Battery remainder (only when
the information comes from the device).
[5 / ]: Selects the
other registered device.
Connected device name
When a cellular phone with audio function
is registered/connected,
appears.
Activates <
Voice Dialing>
function. (Hold)
Display <
Dial Menu> screen.
Appears on any source information screen
when the Bluetooth adapter is connected.
Bluetooth icon
Lights up when the Bluetooth adapter
is connected.
EN38-49_KW-ADV792[J]3.indd 39EN38-49_KW-ADV792[J]3.indd 39 12/22/08 9:56:41 AM12/22/08 9:56:41 AM