Filter
Top Products
61REFERENCES
ENGLISH
Continued on the next page
Symptom Remedy/Cause
USB (for
KW-AVX726/KW-AVX725
)
• Noise is generated. The track played back is not a playable file format. Skip to another
file.
• Tracks cannot play back as you
have intended them to play.
Playback order may differ from the one played back using other
players.
• “Now Reading...” keeps flashing
on the screen.
• Readout time varies depending on the USB device.
• Do not use too many hierarchy and folders.
• Turn off the power then on again.
• “Cannot play this device Check the
device” appears on the screen.
No tracks are stored. Copy tracks to the USB device.
• Correct characters are not
displayed (e.g. album name).
For available characters,
56.
• While playing a track, sound is
sometimes interrupted.
The tracks are not properly copied into the USB device. Copy tracks
again, and try again.
Bluetooth
• Bluetooth device does not detect
the unit.
This unit can be connected with one Bluetooth cellular phone and
one Bluetooth audio player at a time.
While connected to a device, this unit cannot be detected from
another device. Disconnect currently connected device and search
again.
• The unit does not detect the
Bluetooth device.
• Check the Bluetooth setting of the device.
• Search from the Bluetooth device.
• The unit does not make pairing
with the Bluetooth device.
• Enter the same PIN code for both the unit and target device. If
the PIN code of the device is not indicated on its instructions, try
“0000” or “1234.”
• Select the device name from <Special Device>, then try to
connect again. (
29)
• Echo or noise occurs. Adjust the microphone unit (supplied with Bluetooth Adapter)
position.
• Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth cellular
phone.
• Move the car to place where you can get a better signal reception.
• The sound is interrupted or
skipped while using a Bluetooth
audio player.
• Reduce the distance between the unit and the Bluetooth audio
player.
• Disconnect the device connected for “
Bluetooth PHONE
.”
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the player again.
• “NEW DEVICE” cannot be selected
for “
Bluetooth AUDIO
.”
Bluetooth audio player is already connected. To select “NEW
DEVICE,” disconnect it. ( 29)
• The connected audio player
cannot be controlled.
Check whether the connected audio player supports AVRCP (Audio
Video Remote Control Profile).
EN58-65_KW-AVX726_005A_5.indd 61EN58-65_KW-AVX726_005A_5.indd 61 12/16/08 12:27:36 PM12/16/08 12:27:36 PM