Filter
Top Products
26
ENGLISH
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustments”
on page 27.
• To adjust the bass reinforcement level temporarily,
see “Reinforcing the bass sound” on page 25.
To store a sound mode separately for
each playback source (EQ Link)
Once you select a sound mode, it is stored in
memory. It will be recalled every time you select
the same source.
A sound mode can be stored for each of the
following sources — FM1, FM2, FM3, AM, CD
and external components.
• See also “Changing the general settings (PSM)”
on page 28.
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
2 Press ¢ or 4 to select “EQ LINK”
(Equalization Link).
3 Turn the control dial clockwise to select “ON.”
4 Press SEL (select) to finish the setting.
To cancel EQ Link, repeat the same procedure
and select “OFF” by turning the control dial
counterclockwise in step 3.
• When “EQ LINK” is set to “ON”
The selected sound mode can be stored in
memory for the current source.
Each time you change to the same source, the
same sound mode is also recalled, and shown
on the display.
• When “EQ LINK” is set to “OFF”
The selected sound mode effect applies to all
the sources selected.
Selecting preset sound modes
(EQ)
You can select a preset sound mode suitable to
the music genre.
1
Press EQ to activate the sound mode
(EQ).
Each time you press the
button, the sound mode (EQ) is
activated or deactivated.
• When the sound mode (EQ)
is activated, the last selected
sound mode is recalled and
applied to the current source.
2
Select the sound mode you want.
As you turn the control
dial, the sound modes
change as follows:
FLAT O Hard Rock O R & B*O POP O
JAZZ O Dance Music O Country O Reggae O
Classic O USER 1 O USER 2 O
USER 3 O
(back to the beginning)
* Rhythm and Blues
To cancel the sound mode, select “FLAT” in
step 2.
Ex.: When you have selected “FLAT” previously.
EQ level changes as you select the sound mode.
Ex.: When you select “POP”
EN25-27KD-SH707[U]f.pm5 23/1/02, 18:4426