Filter
Top Products
27
ENGLISH
5
Adjust the level of the selected
frequency in the above step.
• You can adjust the
level within the range
of “– 05” (minimum) to
“+ 05” (maximum) for
each frequency.
6
Repeat steps 4 and 5 to adjust the
other frequency levels.
7
Select one of the user sound modes
(USER 1, USER 2, USER 3).
8
Press SEL (select) to store the
adjustments.
Ex.: When you select “USER 2”
Storing your own sound
adjustments
You can adjust the sound modes to your preference
and store your own adjustments in memory
(USER 1, USER 2 and USER 3).
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Press EQ to activate the sound mode
(EQ).
Each time you press the
button, the sound mode (EQ)
is activated or deactivated.
• When the sound mode (EQ)
is activated, the last selected
sound mode is recalled and
applied to the current source.
2
Select the sound mode you want.
3
Press SEL (select) to enter adjustment
mode.
4
Select the frequency.
• You can select 70 Hz,
150 Hz, 400 Hz, 1 kHz,
2.4 kHz, 6 kHz and
12.5 kHz.
Note:
If you want to make adjustment temporarily, but not
store in memory, skip step 7 and 8. Your temporary
adjustment will be take effect until you select another
sound mode.
Ex.: When you have selected “POP” previously
The last adjusted frequency and its level appear
on the display.
EN25-27KD-SH707[U]f.pm5 23/1/02, 18:4427