Filter
Top Products
31
ENGLISH
To select the subwoofer cutoff frequency
– CUT OFF F
When a subwoofer is connected to this unit,
select an appropriate cutoff frequency level for
your subwoofer.
When shipped from the factory, the subwoofer
cutoff frequency is set to “MID(80Hz).”
• LOW(50Hz): Frequencies higher than 50Hz
are cut off to the subwoofer.
• MID(80Hz): Frequencies higher than 80Hz
are cut off to the subwoofer.
• HIGH(115Hz): Frequencies higher than 115Hz
are cut off to the subwoofer.
To select the external component to use –
EXT IN
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adaptor KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select which
component — CD changer or external component
— to use.
When shipped from the factory, “CD CHANGER”
is selected as the external component.
• CD CHANGER: To use the CD changer.
• LINE INPUT: To use the external
component other than the
CD changer.
Note:
For connecting the Line Input Adaptor KS-U57 and
the external component refer to the Installation/
Connection Manual (separate volume).
To set the auxiliary input switch on or off
– AUX IN
You can switch the auxiliary input off when no
external component is connected to the auxiliary
input jack.
When shipped from the factory, the line input
switch is set to “ON.”
• ON: You can select “AUX INPUT
(AUX)” as the playback source.
• OFF: You cannot select “AUX INPUT
(AUX)” as the playback source.
To change the FM tuner selectivity
– IF FILTER
In some areas, adjacent stations may interfere
with each other. If this interference occurs, noise
may be heard. This unit has been preset to
automatically reduce this interference noise
(“AUTO”) when shipped from the factory.
• AUTO: When this type of interference occurs,
this unit automatically increases the
tuner selectivity so that interference
noise will be reduced. (But the stereo
effect will also be lost.)
• WIDE: Subject to the interference from
adjacent stations, but sound quality
will not be degraded and the stereo
effect will not be lost.
To turn the tag display on or off – TAG DISP
An MP3 file can contain file information called
“ID3 Tag” where its album name, performer, track
title, etc. are recorded.
There are two versions–ID3v1 (ID3 Tag version 1)
and ID3v2 (ID3 Tag version 2). This unit is
compatible only with ID3v1.
When shipped from the factory, “ON” is selected.
• ON: Turns on the ID3 tag display while
playing MP3 files.
• If an MP3 file does not have ID3
tags, directory name and file name
appear.
Note:
If you change the setting from “OFF” to
“ON” while playing an MP3 file, the tag
display will be activated when the next
file stars playing.
• OFF: Turns off the ID3 tag display while
playing MP3 files. (Only the directory
name and file name can be shown.)
EN28-34KD-SH707[U]f.pm5 24/1/02, 11:3231