Filter
Top Products
8
ENGLISH
Turning on the power
1
Turn on the power and select the
source.
When you press the button
for the first time, the power
comes on. Then each time
you press the button, the
source changes as follows:
* If a disc is not in the loading slot, you
cannot select CD as the source to play.
** Without connecting the CD changer, you
cannot select it as the source to play.
*** To select “LINE INPUT,” you have to set
“EXT IN” to “LINE INPUT”
(see page 31).
**** If “AUX IN” is set to “OFF” (see page 31),
you cannot select “AUX INPUT (AUX)” as
the source.
To operate the tuner (FM or AM),
see pages 10 – 13.
To play a CD,
see pages 14 – 17.
To play an MP3 disc,
see pages 20 – 24.
To operate external components
(AUX INPUT and LINE INPUT),
see page 35.
To operate the CD changer,
see pages 36 – 38.
2
Adjust the volume.
Note:
After adjusting the volume, you can push in the
control dial to avoid unintended operations.
To use it again, push the control dial again to
make it come out.
3
Adjust the sound as you want.
(See pages 25 – 27.)
• You can adjust and store the input level of
each source except FM (see page 25).
To drop the volume in a moment
Press and hold ATT while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press and
hold the button again.
• If you turn the control dial clockwise, you can
also restore the sound.
To turn off the power
Press and hold SOURCE until “SEE YOU”
appears on the display.
• If you turn off the power while listening to
a CD, you can start CD playback from where
you have stopped next time you turn on the
power.
BASIC OPERATIONS
Note:
When you use this unit for
the first time, set the built-in
clock correctly, see page 9.
EB
E-BASS DISP
BAND MODE
To increase the volume.
To decrease the volume.
Volume level indicator
Volume level appears.
FM TUNER
(FM)
CD
AM TUNER
(AM)
*
AUX INPUT****
(AUX)
CD CHANGER**
(CD CH)
LINE INPUT***
(LINE)
or
EN08-09KD-SH707[U]f.pm5 24/1/02, 11:318