Filter
Top Products
96 EuroPak-15a Receiver User Manual Rev 5
Chapter 6 Data Logs
6.3.11 SYSTEMLEVELS System Hardware Levels
This log contains environmental and voltage parameters for the receiver card.
Log Type: Synchronous Message ID: 653
Recommended Input:
LOG SYSTEMLEVELSA ONTIME 1
Example Output:
#SYSTEMLEVELSA,COM1,0,77.5,FINE,338,320405.000,00A00000,0000,33331;
1,
L1E5A,PM,58.000,0.138,1.194,11.636,4.985,4.564,3.230,1.588,77.880,
4.223*B5E852BE
Field Field Name Data Description Format
Binary
Bytes
Binary
Offset
1 header
This field contains the message header, in ASCII or Binary
format. See Section 4.3 on Page 35.
H 0
2 # comp Number of components Ulong 4 H
3 type Component type, see Table 44 on Page 91 Enum 4 H + 4
4 Reserved Enum 4 H + 8
5 temp Board temperature (°C) Float 4 H + 12
6 ant current Approximate internal antenna current (A) Float 4 H + 16
7 core volt 1V CPU core voltage (V) Float 4 H + 20
8 supply volt 12V supply voltage (V) Float 4 H + 24
9 RF volt 5V RF supply voltage (V) Float 4 H+28
10 LNA volt Internal LNA voltage (V) Float 4 H+32
11 3.3 V supply 3.3 V supply voltage Float 4 H+36
12 TCXO control volt Control voltage for TCXO Float 4 H+40
13 idle time Idle time (%) Float 4 H+44
14 LNA output volt LNA output voltage (V) Float 4 H+48
15… Next component offset = H + 4 + (# comp x 48)
variable 32-bit CRC (ASCII and Binary only) Hex 4
H + 4 + (#
comp x 48)