Filter
Top Products
NovAtel Firmware and Software Chapter 5
AG-STAR User Manual Rev 2 38
Figure 23: COM Port Setup
5.3.2.3 Downloading Firmware
1. Select the file to download according to Section 5.3.2.1, Open a File to Download on page 37.
2. Ensure the file path and name are displayed in main display area (see Figure 22, Open File in WinLoad
on page 37).
3. Click Write Flash to download the firmware.
4. When Searching for card appears in the main display, power cycle the receiver.
Figure 24: Searching for Card
5. If the Authorization Code window appears, enter the auth-code and click OK. See Section 5.2,
Authorization Code on page 35 for further information about the Authorization Code.
Figure 25: Authorization Code Window
6. The receiver finishes the download and then resets. The process is complete when Done appears in the
main display area.
Figure 26: Upgrade Process Complete
7. Close WinLoad.