Filter
Top Products
AG-STAR User Manual Rev 2 51
Field Field Type ASCII Value
Binary
Value
Description
Binary
Format
Binary
Bytes
Binary
Offset
1COM
header
- - This field contains the command
name or the message header
depending on whether the command
is abbreviated ASCII, ASCII or binary.
-H0
2 port 1 COM1 Select COM port 1 to configure Enum 4 H
2 COM2 Select COM port 2 to configure
6 THISPORT Select the current COM port (default)
8 ALL Select all COM ports
3 bps/baud 300, 600, 900, 1200, 2400,
4800, 9600, 19200, 38400,
57600, 115200, or 230400
Communication baud rate (bps). ULong 4 H+4
4 parity 0 N No parity (default) Enum 4 H+8
1 E Even parity
2 O Odd parity
5 databits 7 or 8 Number of data bits
(default = 8)
ULong 4 H+12
6 stopbits 1 or 2 Number of stop bits
(default = 1)
ULong 4 H+16
7 handshake 0 N No handshaking (default) Enum 4 H+20
1 XON XON/XOFF software handshaking
2CTS
CTS/RTS hardware handshaking
a
8 echo OFF 0 No echo (default) Enum 4 H+24
ON 1 Transmit any input characters as they
are received
9 break OFF 0 Disable break detection Enum 4 H+28
ON 1 Enable break detection (default)
a. Although the standard command for the receiver card within the AG-STAR accepts the CTS option for hardware
handshaking, the physical lines for hardware flow control are not available on the AG-STAR connector.