Onkyo DR-L50 Car Video System User Manual


 
18
Connecting to a TV (Other than European model)
Before connecting
Refer also to the instruction manual of the TV.
When you connect the DVD Receiver to the TV, be sure to turn
off the power and unplug both the units from the plugs before
making any connections.
Connect the DVD Receiver to the TV directly. If you connect the
DVD Receiver to a VCR, TV/VCR combination, or video selector,
the playback picture may be distorted as DVD videos are copy
protected.
L (White)
R (Red)
Connect the plugs securely.
Note that one audio/video connection
cable and one S video connection cable
are supplied.
Incomplete
Insert completely
Video
(Yellow)
Connecting to a TV (or projector)
Using the supplied audio/video connection cable, make
audio connections from the TV/LINE IN L and R jacks to
the corresponding audio output jacks on the TV. In the
same manner, make video connections from the VIDEO
OUTPUT VIDEO jack to the corresponding video input
jack on the TV.
If your TV has a S video input jack and/or component video
input jacks, make S video connection to the S VIDEO jack
using supplied S video connection cable and/or make
component video connection to the COMPONENT jacks
using component video connection cable (not supplied).
These connections allow you to enjoy higher quality picture
playback. You can switch between [S1] and [S2] S-video
output from the Setup menu on page 71.
S video connection cable
TV or projector
Audio/video connection cable
Signal flow
Notes
Actual labels for component video inputs may vary depending
on the TV manufacturer (ex. Y/CB/CR, Y/B-Y/R-Y, etc.).
In some TVs, the color levels of the playback picture may be
reduced slightly or the tint may change. In such a case, adjust
the TV for optimum performance.
See Turning the unit on/off with the TVs power switch IPM function on page 27 for Inteligent Power Management (IPM) function.
Optical fiber cable
AC
INLET
PREOUT
SUB
WOOFER
TV/LINE
MD/CDR/TAPE
DIGITAL
OPTICAL
AUDIO
REMOTE
CONTROL
AM
FM
75
SURROUND
SPEAKERS
FRONT SPEAKERS
CENTER
R
L
IN
IN IN
OUT
L
R
R
L
OUT
ANTENNA
VIDEO
OUTPUT
S VIDEO VIDEO COMPONENT
YP
B
P
R
S VIDEO
IN
COMPONENT VIDEO IN
DIGITAL
OUT
OPTICAL
VIDEO
IN
AUDIO
OUT
RL
YP
B
P
R
DO NOT connect the
power cord at this time.
Component video
connection cable
Y
PB
PR
Use the DIGITAL
OPTICAL IN jack in
combination with the TV/
LINE IN jack. When you
use the Input selector to
select TV/LINE IN,
DIGITAL OPTICAL IN is
also activated. When both
a digital signal and an
analog signal are input,
the digital signal takes
precedence.