Filter
Top Products
Causes
• The DVD Receiver is in repeat playback
mode, memory playback mode, or
random playback mode, etc.
• Power supply fluctuations or other
abnormalities such as static electricity
may interrupt correct operation.
• The selected function does not operate
for that disc.
• The operation is prohibited by the DVD
receiver.
• There is a Video CD, CD or MP3 loaded
in the DVD receiver and the setting that
was changed only applies to DVD
performance.
• The [Setup Menu Mode] is set to [Basic].
• The pause mode is engaged.
• The volume level of TV or DVD receiver is
set to minimum.
• The multi aspect setting is not
appropriate.
• The TV is connected with an S-video
cord.
• The disc is not ISO 9660 compatible.
• Files are not MPEG1 Audio Layer 3
format, 44.1 or 48 kHz, fixed bit-rate.
• The track name does not end in “.mp3” or
“.MP3”.
• More than 251 folders and tracks are
recorded on a disc.
• A multi-session disc is inserted.
• The disc contains variable bit-rate MP3
file.
Remedies
• Resume normal playback.
• Switch off the STANDBY/ON, then switch
it on again. If not recovered, disconnect
the power cord, then connect it again.
–
–
• The setting will be effective the next time
a DVD is loaded.
• Set the [Setup Menu Mode] to [Expert].
• Press £ or 8 to exit the pause mode.
• Increase the volume level.
• Change the aspect setting in the [TV
Screen] setting in the Setup screen Video
1 menu to the screen type most
appropriate to the TV or monitor you are
using.
• If you connected your TV with an S-Video
cord, in rare cases the TV picture may
appear stretched. In this case switch the
output from [S2] to [S1]
• Check the disc.
• Check the file format.
• This system will not recognize file that
does not end in ".mp3" or ".MP3" as an
MP3 track. Change the track name.
• This DVD Receiver only recognizes the
first 250 folders and tracks on a disc. If
there are more folders/tracks than this,
you will not be able to play them.
• This DVD Receiver is not compatible with
multi-session discs. If the disc is multi-
session, you will only be able to play
tracks recorded onto the first session.
• Be sure to make MP3 CD with fixed bit-
rate setting.
Symptoms
Playback doesn’t follow the
course of the disc’s
programs.
The buttons on the remote
controller and DVD
Receiver do not operate.
mark appears on
screen.
mark appears on
screen.
When making changes in
the Setup screen menus,
is displayed.
Some settings in the Setup
Menu do not appear.
No sound is reproduced.
The screen is stretched or
aspect does not change.
The disc containing the
MP3 tracks won’t play.
Some MP3 tracks appear
to be missing from a disc.
Pages
56, 58-62
26
31
31
65
69
31
42
70
71
8
8
8
8
8
8
DVD (VIDEO CD/Audio CD)
85