Filter
Top Products
3 Touch Source Level Adjuster on the
audio function menu.
4 Touch a or b to adjust the source vo-
lume.
Range: +4 to –4
Notes
! When selecting FM as the source, you cannot
switch to Source Level Adjuster.
! The AM volume level can also be adjusted
with this function.
! Video CD, CD, compressed audio, DivX,
MPEG-1, MPEG -2 andMPEG-4 are automati-
cally set to the same source level adjustment
volume.
! iPod and USBstorage deviceare automati-
cally set to the same source level adjustment
volume.
! External unit 1 and external unit 2 are automa-
tically set to the same source level adjustment
volume.
Setting up the DVD player
Setting the subtitle language
You can set a desired subtitle language. When
available, the subtitles will be displayed in the
selected language.
1 Display the Video Setup menu.
Refer to Introduction of menu operations on
page 57.
2 Touch Subtitle Language on the
Video Setup menu.
A subtitle language menu is displayed.
3 Touch the desired language.
The subtitle language is set.
# If you have selected Others, refer to When you
select Others on this page.
Notes
! If the selected language is not available, the
language specified on the disc is displayed.
! You can also switch the subtitle language by
touching the icon during playback. (Refer to
Playing moving images on page 24.)
! The setting made here will not be affected
even if the subtitle language is switched dur-
ing playback using Subtitle.
When you select Others
A language code input display is shown when
Others is selected. Refer to Language code
chart for DVD on page 107.
% Touch 0 to 9 to input the language
code.
# To cancel the entered numbers, touch C.
# To register the code, touch the following touch
panel key.
Registering thecode.
Setting the audio language
You can set the preferred audio language.
En
60
Section
15
Menu operations