Filter
Top Products
Setting remote control code type
When the remote control operation switch is
set to DVD, changing the remote control code
type enables you to operate the Pioneer DVD
player with the supplied remote control. There
are three remote codes, code type A, code
type B and code type AVH. When operating a
multi-DVD player (e.g. XDV-P650/XDV-P6), se-
lect code A. When operating this unit, select
code AVH.
1 Set the remote control selection switch
on the left side of the remote control to
the appropriate position with a pen tip or
other pointed instrument .
! If you select AVH mode, there is no need to
take the following procedure.
! If you select A/B mode, take the following
procedure and change the code type to the
appropriate type.
2 Press 0 and CLEAR on the remote con-
trol simultaneously to change the code
type.
Initially, the code type is set to A. Each time
you press 0 and CLEAR simultaneously on the
remote control the code type switches be-
tween A and B.
Initial Settings
Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1
1 Function display
Shows the function names.
1 Touch the source icon and then touch
OFF to turn this unit off.
2 Touch the screen to display the touch
panel keys.
3 Touch A.MENU and then touch
INITIAL MENU to display the function
names.
The function names are displayed and oper-
able ones are highlighted.
# To go to the next group of function names,
touch NEXT.
# To return to the previous group of function
names, touch PREV.
4 Touch ESC to return to the ordinary dis-
play.
# To return to the previous display, touch BACK.
Operating this unit
En
46
Section
03