Filter
Top Products
Black plate (55,1)
! If you do notoperate the function withinabout
30 seconds, thedisplay is automatically re-
turned to theplayback display.
Repeating play
There are three repeat play ranges for the
multi-CD player: Multi-CD repeat (multi-CD
player repeat), Track repeat (one-track repeat)
and Disc repeat (disc repeat).
1 Use MULTI-CONTROL to select
Play mode in the function menu.
Play mode appears in the display.
2 Press MULTI-CONTROL to select the re-
peat range.
Press MULTI-CONTROL repeatedly until the
desired repeat range appears in the display.
! Multi-CD repeat – Repeat alldiscs in the
multi-CD player
! Track repeat –Repeat just the current
track
! Disc repeat– Repeat the currentdisc
Notes
! If you select otherdiscs during repeat play,
the repeat playrange changes to
Multi-CD repeat.
! If you perform track searchor fast forward/re-
verse during Track repeat, therepeat play
range changes toDisc repeat.
Playing tracks in random order
Random play lets you play back tracks in ran-
dom order within the repeat range,
Multi-CD repeat and Disc repeat.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Use MULTI-CONTROL to select
Random mode in the function menu.
Random mode appears in the display.
3 Press MULTI-CONTROL to turn random
play on.
Tracks will play in a random order within the
previously selected Multi-CD repeat or
Disc repeat ranges.
# To turn randomplay off, press
MULTI-CONTROL again.
Scanning CDs and tracks
While you are using Disc repeat, the begin-
ning of each track on the selected disc plays
for about 10 seconds. When you are using
Multi-CD repeat, the beginning of the first
track of each disc is played for about 10 sec-
onds.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Use MULTI-CONTROL to select
Scan mode in the function menu.
Scan mode appears in the display.
3 Press MULTI-CONTROL to turn scan play
on.
The first 10 seconds of each track of the cur-
rent disc (or the first track of each disc) is
played.
4 When you find the desired track (or
disc) press MULTI-CONTROL to turn scan
play off.
The track (or disc) will continue to play.
# If the displayhas automatically returned to
the playback display, select Scanmode again by
using MULTI-CONTROL.
<CRB2179-A/N>55
Multi-CD Player
En
55
English
Section
09