Filter
Top Products
4 Press MULTI-CONTROL to establish con-
nection.
# While connecting, CONNECTING flashes. If
the connection is established, CONNECTED is
displayed.
# If the connectionfails, ERROR is displayed. In
this case, try again from the beginning.
Disconnecting a Bluetooth
audio player
This function can be operated only when the
Bluetooth wireless connection is being estab-
lished.
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
CONNECTION.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select
DISCONNECTAUDIO.
4 Press MULTI-CONTROL to disconnect
the Bluetooth wireless connection.
Basic Operations
% Fast forward or reverse
Push and hold MULTI-CONTROL left or right.
% Select a track
Push MULTI-CONTROL left or right.
Note
Even though your audio player does not contain a
Bluetooth module, you can still control it from
this unit viaBluetooth wireless technology. To
control your audioplayer using this unit, connect
a product featuring Bluetooth wireless technol-
ogy (available on the market) to your audio player.
Introduction to advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
3 Turn MULTI-CONTROL to select the
function.
PLAY (play)—STOP (stop)—PAUSE (pause)—
AUTO CONNECT (automatic connection set-
ting)—DEVICE INFO (device information)
Notes
! If a Bluetooth audio playeris not connected to
this unit yet,AUTO CONNECTand
DEVICE INFO appear in the function menu
and other functions are not available.
! If a Bluetooth audio playeris connectedvia
A2DP (Advanced Audio Distribution Profile),
only AUTO CONNECT and DEVICE INFO ap-
pear in the function menu.
! You can also select the function by pressing
FUNCTION on the remote control.
! To return to the ordinary display, press BAND.
! If you do not operate functions within about
30 seconds, the display automatically returns
to the ordinary display.
Function and operation
PAUSE is the same as that of the built-in CD
player.
Function name Operation
PAUSE
Refer to Pausing playback onpage
19.
Operating this unit
En
28
Section
02