Pioneer FH-P800BT Car Stereo System User Manual


 
Introduction of audio
adjustments
1 Audio display
Shows the audio adjustmentstatus.
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se-
lect.
The audio menu is displayed.
3 Turn MULTI-CONTROL to select the
audio function.
Turn MULTI-CONTROL to switch between the
audio functions in the following order.
FADER/BALANCE (balance adjustment)
EQUALIZER (graphic equalizer adjustment)
G.EQ ADJUST (7-band graphic equalizer ad-
justment)LOUDNESS (loudness)SUB W1
(subwoofer on/off setting)SUB W2 (subwoo-
fer setting)BASS BOOST (bass boost)
HIGH PASS FILTER (high pass filter)SLA
(source level adjustment)
# You can also select the audio function by
pressing AUDIO on the remote control.
# You can select the SUB W2 only when sub-
woofer output is turned on in SUB W1.
# When selecting FM as the source, you cannot
switch to SLA.
# To return to the display of each source, press
BAND.
# If you do not operate functions except for
G.EQ ADJUST within about 30 seconds, the dis-
play is automatically returned to the ordinary dis-
play.
Using balance adjustment
You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1 Display the audio menu.
Refer to Introduction of audio adjustments on
this page.
2 Use MULTI-CONTROL to select
FADER/BALANCE.
3 Push MULTI-CONTROL up or down to
adjust front/rear speaker balance.
Each time MULTI-CONTROL is pushed up or
down, the front/rear speaker balance moves
towards the front or rear.
F15to R15is displayed as the front/rear
speaker balance moves from front to rear.
# 0 is theproper setting when only two speakers
are used.
# When the rear output setting is
REAR SP:S/W, you cannot adjust front/rear
speaker balance. Refer to Setting the rear output
and subwoofer controller on page 49.
4 Push MULTI-CONTROL left or right to
adjust left/right speaker balance.
Each time MULTI-CONTROL is pushed left or
right, the left/right speaker balance moves to-
wards the left or right.
L15to R15is displayed as the left/right
speaker balance moves from left to right.
Using the equalizer
The equalizer lets you adjust the equalization
to match the cars interior acoustic character-
istics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Audio Adjustments
En
44
Section
03