Filter
Top Products
HD Radio tuner
Basic Operations
You can use this unit to control an HD Radio
tuner (GEX-P10HD), which is sold separately.
For details concerning operation, refer to the
HD Radio’s operation manual.
1 Band indicator
2 Preset numberindicator
3 Frequency indicator
% Select a band
Press BAND.
# Band can beselected from among FM1, FM2,
FM3 or AM.
% Manual tuning (step by step)
Push MULTI-CONTROL left or right.
% Seek tuning
Push and hold MULTI-CONTROL left or right,
and then release.
# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
Storing and recalling broadcast
frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
! Six stations for each band can be stored in
memory.
1 Press LIST.
Preset screen is displayed.
2 Use MULTI-CONTROL to store the se-
lected frequency in memory.
Turn to change the preset number. Press and
hold to store.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
# You can also change the station by pushing
MULTI-CONTROL up or down.
# To return to the ordinary display, press BAND
or LIST.
# If you do not operate the list withinabout 30
seconds, the display automatically returns tothe
ordinary display.
Using the remote control
% When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1 to 6 and hold until the
preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button the radio station frequency is re-
called from memory.
# You can also recall radio station frequencies
assigned to preset tuning numbers by pushing
MULTI-CONTROL up or down during the fre-
quency display.
Switching the display
Desired information can be displayed.
% Press DISP.
Press DISP repeatedly to switch between the
following settings:
Station name—song title—artist name—pro-
gram type
# Only when the tuner has been tuned in to an
HD Radio broadcasting, display can be changed.
# When the tuner has been tuned in to an HD
Radio broadcasting, default display ischanged
into station name instead of frequency.
Available accessories
En
63
Section
06
Available accessories