Filter
Top Products
% Touch STILL PICTURE on the DVD setup
menu to select the setting.
Touch STILL PICTURE repeatedly until the de-
sired setting appears in the display.
! AUTO – FIELD orFRAME is selected auto-
matically by this unit.
! FIELD – Produces a stable, generallyshake-
free image.
! FRAME – Produces a sharper image,but
more prone to shakethan field stills.
To play back bonus groups
Some DVD audio discs have an extra ‘bonus’
group that requires a four-digit password to
access. See the disc packaging for details and
the password. When you try and play the
bonus group, the password input screen will
automatically appear.
! The bonus group can be played back after
the password has been entered, until the
disc is removed from the unit.
1 Touch BONUS GROUP on the DVD setup
menu.
2 Touch 0—9 to input a four-digit pass-
word.
# If you input an incorrectpassword, touch C
and then input thecorrect password.
3 Touch ENTER.
Displaying your DivX
®
VOD
registration code
In order to play DivX VOD (video on demand)
content on this unit, you first need to register
the unit with your DivX VOD content provider.
You do this by generating a DivX VOD registra-
tion code, which you submit to your provider.
% Touch DivX VOD on the DVD setup
menu.
Your 8-digit registration code is displayed.
! Make a note of thecode as you will need it
when you register with aDivX VOD
provider.
Setting remote control
code type
When the remote control operation switch is
set to DVD, changing the remote control code
type enables you to operate the Pioneer DVD
player with the supplied remote control. There
are three remote codes, code type A, code
type B and code type AVH. When operating a
multi-DVD player (e.g. XDV-P6), select code A.
When operating this unit, select code AVH.
1 Set the remote control selection switch
on the left side of the remote control to
the appropriate position with a pen tip or
other pointed instrument .
! If you select AVH mode,there is no need to
take the following procedure.
! If you select A/B mode, take thefollowing
procedure and changethe code type to the
appropriate type.
2 Press 0 and CLEAR on the remote con-
trol simultaneously to change the code
type.
Initially, the code type is set to A. Each time
you press 0 and CLEAR simultaneously on the
remote control the code type switches be-
tween A and B.
Setting up the DVD player
En
115
Section
22
Setting up the DVD player