Filter
Top Products
% When you find a station that you want
to store in memory, keep touching one of
preset tuning keys P01—P12 until the beep
sounds.
The next time you touch the same preset tun-
ing key the station is recalled from memory.
# To switchbetween P01—P06 and P07—P12,
touch PREV or NEXT.
# When P01—P06 andP07—P12 are not dis-
played, you can displaythem by touching LIST.
Notes
! Up to 24 stations,12 for each of two TV bands,
can be stored inmemory.
! You can also usea and b to recall stationsas-
signed to preset tuningkeys P01—P12 when
P01—P12 are notdisplayed.
Confirming current channel
and other settings
When watching a TV on the rear display, you
can display the reception information such as
the channel, band and preset channel list.
! Only the remote control can operate this
function. To perform this function, switch
the remote control operation mode to TV.
(Refer to page 21.)
% Press DIRECT to display the reception
information.
Each press of DIRECT displays reception infor-
mations in the following order:
Current channel information (channel and
band)—Preset channel list—Reception infor-
mations disappear
# Reception informations are displayed for eight
seconds.
Storing the strongest
broadcast stations
sequentially
1
1 Functiondisplay
Shows the function names.
1 Touch AV MENU and then touch
FUNCTION to display the function names.
The function names are displayed and oper-
able ones are highlighted.
2 Touch BSSM on the function menu to
turn BSSM on.
BSSM begins to flash. While BSSM is flashing
the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished, BSSM stops flashing.
# To cancelthe storage process, touch BSSM
again.
3 Touch ESC to return to the TV picture.
# To returnto the previous display, touch BACK.
Note
Storing broadcast stationswith BSSM may re-
place broadcast stations youhave saved using
P01—P12.
TV tuner
En
85
Section
18
TV tuner