Filter
Top Products
Switching the sound
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
! Sound from this system returns to normal
when the muting or attenuation is can-
celed.
% Touch MUTE on the initial menu to se-
lect any of the muting, attenuation or off.
Touch MUTE until the desired setting appears
in the display.
! MUTE – Muting
! ATT –10dB – Attenuation
! ATT –20dB – Attenuation (ATT –20dB has a
stronger effect than ATT –10dB)
! OFF – Turn the sound muting/attenuation
off
Notes
! The sound is turnedoff, MUTEis displayed
and no audio adjustmentsare possible.
! The sound is attenuated,ATT is displayed and
no audio adjustments,except volume control,
are possible.
! Operation returns to normalwhen the phone
connection is ended.
Switching the automatic
disc playback
You can turn automatic disc playback on or off
when you insert a disc into the disc loading
slot. When this function is on, the disc will be
automatically played after it is inserted into
the disc loading slot.
Initially, this function is set to on.
% Touch DVD DISC AUTO on the initial
menu to turn automatic disc playback on.
# To turnautomatic disc playback off, touch
DVD DISC AUTO again.
Resetting the audio functions
You can reset all audio functions except vo-
lume.
Important
If you perform this operation, audio settings are
erased. For this reason, we recommend that you
record the settings inthe sheet on page 135after
you have completedaudio adjustments.
1 Touch AUDIO RESET on the initial
menu.
2 Touch RESET.
Proceed with reset? appears and asks you to
confirm it.
3 Touch RESET again to reset audio func-
tions.
Reset completed is displayed and the audio
settings are reset.
# To cancelresetting the audio functions, touch
CANCEL.
Switching the DSP setting
mode
This unit features two operation modes: the
network mode and the standard mode. You
can switch between modes as desired. Initi-
ally, the DSP setting is set to the standard
mode.
Initial Settings
En
117
Section
23
Initial Settings