Filter
Top Products
! The center speaker largely determines the
sound image and getting the balance right
isn’t easy. We recommend reproducing a 2-
ch. audio (a CD for example) and getting
the balance right among the speakers ex-
cept for the center, and then reproducing a
5.1-ch. audio (Dolby Digital or DTS) and ad-
justing the center speaker output to the
balance you have already got among the
other speakers.
1 Touch ADJ. next to PARAM ETRIC EQ on
the sound setting menu.
2 Touch LR Common/LR Independent to
switch the equalizer adjustment method.
! LR Common – Adjustsleft and right speak-
ers simultaneously.
! LR Independent – Adjustsleft and right
speakers separately.
3 Touch EQ to select the equalizer.
Touch EQ repeatedly to switch between the fol-
lowing equalizers:
POWERFUL—NATURAL—VOCAL—FLAT—
CUSTOM1—CUSTOM2—CUSTOM3—
LAST MEMORY—SUPER BASS (S. BASS)
# You can also selectthe equalizer by using
EQUALIZER LIST.
# To closethe equalizer curve list, touch CLOSE.
# You can select LASTMEMORY only whenthe
adjusted equalizer curve is not memorized in this
unit.
4 Touch or next to SPEAKER to select
the speaker to be adjusted.
Touch
or until the desired speaker appears
in the display.
FRONT LEFT (front left speaker)—
FRONT RIGHT (front right speaker)—
REAR LEFT (rear left speaker)—REAR RIGHT
(rear right speaker)—FRONT CENTER (front
center speaker)—REAR CENTER (rear center
speaker)
# You can mute the selectedspeaker unit by
touching
. To cancel muting, touch .
# You cannot select speakerswhose size is set
at OFF.
5 Touch BAND to select the equalizer
band to be adjusted.
Each time you touch BAND it selects equalizer
bands in the following order:
LOW (low)—MID (mid)—HIGH (high)
6 Touch
or to select the center fre-
quency of selected band.
Touch
or until the desired frequency ap-
pears in the display.
40—50—63—80—100—125—160—200—
250—315—400—500—630—800—1k—
1.25k—1.6k—2k—2.5k—3.15k—4k—5k—
6.3k—8k—10k—12.5k (Hz)
# You can select a center frequencyfrom
among 20 frequencies foreach band. You can
change the center frequency in 1/3-octave steps,
but you cannot selectfrequencies that have inter-
vals shorter than 1octave among the center fre-
quencies of the three bands.
7 Touch or to adjust the equalizer
level.
Each time you touch
or it increases or
decreases the equalizer level. +12dB to –12dB
is displayed as the level is increased or de-
creased.
# When you adjust thespeaker loudness with
selecting LR Common, the equalizerlevels of
both side speakers arechanged simultaneously.
Thus, if the equalizerlevel of one speaker is at
maximum or minimum,the level of the other
speaker is at fulllimit in opposite direction.
8 Touch Q.Fac to select the desired Q fac-
tor.
Each time you touch Q.Fac it switches be-
tween the following Q factor:
1.2 (wide)—3.6 (narrow)
Audio Adjustments
En
99
Section
20
Audio Adjustments