Filter
Top Products
Note
If touch panel adjustmentcannot be performed
properly, consult your local Pioneer dealer.
Using the AUX source
This unit can control an auxiliary equipment
such as VCR or portable device (sold sepa-
rately). When connected, auxiliary equipment
is automatically read in as AUX source and as-
signed to AUX.
About AUX connection method
You have two methods to connect auxiliary
equipment to this unit.
Stereo mini pin plug cable (AUX1)
When connecting auxiliary equipment using a
stereo mini plug cable
% Insert the stereo mini plug into the mi-
crophone/auxiliary input jack on this unit.
For more details, refer to the installation man-
ual.
IP-BUS-RCA interconnector (AUX2)
When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)
% Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner’s manual.
# You can only makethis type of connection if
the auxiliary equipment has RCAoutputs.
Selecting AUX as the source
% Touch the source icon and then touch
AUX1/AUX2 to select AUX as the source.
# If the auxiliary setting is not turnedon, AUX
cannot be selected.For more details, seeSwitch-
ing the auxiliary setting on page 116.
Setting the AUX title
The title displayed for the AUX source can be
changed.
! Each title can be up to 10 characters long.
1 After you have selected AUX as the
source, touch AV MENU and FUNCTION and
then touch NAME EDIT.
2 Touch the letter you wish to input.
For details concerning operation, refer to Edit-
ing the name of sound settings on page 106.
Using the PGM button
You can operate the preprogrammed functions
for each source by using BOOKMARK on the
remote control.
% Press BOOKMARK to turn pause on
when selecting the following sources:
! DVD – Built-in DVDplayer
! S-DVD – DVD player/multi-DVD player
! M-CD – Multi-CD player
! iPod – iPod
! BTAUDIO – Bluetooth Audio
# To turnpause off, press BOOKMARK again.
% Press BOOKMARK and hold to turn
BSM on when selecting FM or AM as the
source.
Press BOOKMARK and hold until the BSM
turns on.
Other Functions
En
122
Section
24