Filter
Top Products
41
Procedure for installation on carpet (Vertical position) Procedure for installation on carpet (At a 45° angle)
Installation (2)
1
2 3
4 5
¡Set the built-in anti-vibration
boards on both the left and
right sides to the vertical
installation position “V”.
¡Attach Large bracket (L) and
Large bracket (R) to the
changer using the hexagonal
bolts (M5 x 8).
¡Attach Large brackets (L)
and (R) to their respective
brackets (B) using the
hexagonal bolts (M6 x 20)
and the hexagonal nuts (M6).
¡Pull back the carpet and determine
where to attach the changer.
¡Stick the supplied double-sided
tape to the bottom of the brackets
(B) and peel off the paper backing.
¡Affix the changer to the floor by
pressing in place.
¡Using a knife, cut “X”s in the carpet
directly above the brackets (B)
bolts.
¡Return the carpet to its original
position allowing the bolts to stick
through.
¡
Once more, use the hexagonal nuts to
attach the changer on top of the carpet.
¡Remove the hexagonal nuts and
take off the changer.
H
V
45°
H
V
45°
Hexagonal bolts
(M6 x 20)
Built-in anti-vibration
board position
H
V
45°
H
V
45°
Hexagonal
bolts
(M5 x 8)
1
2 3
4 5
¡Set the built-in anti-vibration
boards on both the left and
right sides to the 45°
installation position “45°”.
¡Attach Large bracket (L) and
Large bracket (R) to the
changer using the hexagonal
bolts (M5 x 8).
¡Attach Large brackets (L)
and (R) to their respective
brackets (B) using the
hexagonal bolts (M6 x 20)
and the hexagonal nuts (M6).
¡Pull back the carpet and determine
where to attach the changer.
¡Stick the supplied double-sided
tape to the bottom of the brackets
(B) and peel off the paper backing.
¡Affix the changer to the floor by
pressing in place.
¡Using a knife, cut “X”s in the carpet
directly above the brackets (B)
bolts.
¡Return the carpet to its original
position allowing the bolts to stick
through.
¡Once more, use the hexagonal nuts
to attach the changer on top of the
carpet.
¡Remove the hexagonal nuts and
take off the changer.
Hexagonal bolts
(M6 x 20)
H
V
45°
H
V
45
°
H
V
45
°
H
V
45
°
Built-in anti-vibration
board position
Hexagonal
bolts
(M5 x 8)
DV-S100/ZA(GB) 03.11.28 1:19 PM ページ41