Filter
Top Products
SIR-GTRC1 Streamer GTR User and Installation Guide
11
Once the antenna cable is routed through the
vehicle, and you are satisfied with the cable
routing, peel the yellow protective material from
the adhesive strip and adhere the adhesive strip
to the rubber antenna cover/tail. Next peel the red
protective material from the adhesive strip and
press the rubber antenna cable cover/tail firmly into
place on the vehicle.
molding around rear window, as shown. Route the
cable from the lowest point of the rear window into
the trunk. Take advantage of any existing cable
channels or wiring conduits.
For SUVs, mini-vans & 5-door vehicles, bring the
cable into the vehicle under the rubber molding for
the tailgate, and continue under the interior trim.
From the trunk, or rear of the vehicle, route the
cable around the passenger compartment and to
the front of the vehicle, to the receiver. Take care
not pull the cable across sharp edges that could
damage it, and keep it away from areas where it
might entangle feet. Coil any excess antenna cable
in a location where it can be hidden.
RUBBER ANTENNA
CABLE COVER/TAIL
ADHESIVE
STRIP
ANTENNA
CABLE
ANTENNA
(UNDERSIDE)
PROTECTIVE MATERIAL
(RED SIDE)