Filter
Top Products
SIR-GTRC1 Streamer GTR User and Installation Guide
44
Auto Select
Auto Select chooses whether the Receiver
immediately tunes to a channel when a channel
is highlighted, or whether you must first press
the select button in order to tune to a highlighted
channel in any of the list modes. Turn Auto Select
On if you would like the Receiver to automatically
tune to the highlighted channel without you having
to press the select button. This will allow you to
quickly listen to all the available programming in
any displayed channel list.
The default setting for Auto Select is Off, meaning
that you must press the select button to tune to a
channel in a listing.
To change Auto Select setting to On or Off, use the
channel up or down buttons to highlight “On” or
“Off”, and press the select button.
Auto Select
On
OffOff
To exit the Auto Select menu, press the MENU
button.
Audio Level
The Audio Level setting adjusts the level of the
audio output of the Receiver.
To adjust the audio level, use the channel up and
down buttons to change the audio level. The bar
graph will move to indicate the change.
- +- +
Audio Level
To exit the Audio Level menu, press the MENU
button.