Filter
Top Products
SIR-GTRC1 Streamer GTR User and Installation Guide
13
You will not be able to tune to any other
channels until you activate your SIRIUS
subscription.
4. To listen to the audio from your Receiver, you
will need to tune the FM radio in your vehicle
and the FM transmitter in the Receiver to the
same FM frequency. The FM transmitter in
the Receiver defaults to 88.1 MHz, so you can
begin by tuning your FM radio to 88.1 MHz.
If there is an FM station broadcasting on that
frequency, you will have to search for a quiet
frequency to use. Refer to the section titled, FM
Transmitter in this User Manual for instructions
on how to tune the FM transmitter to other FM
frequencies.
5. Use the channel up and down buttons to tune
the Receiver to channel 000 to display the
Receiver’s unique 12-digit SIRIUS ID Number
(SID). You may also directly tune to channel
Activating your SIRIUS Subscription
Before you can listen to the SIRIUS service, you
need to subscribe to the SIRIUS Satellite Radio
service.
1. Be sure that the Receiver is correctly installed
and that the antenna is oriented to receive the
SIRIUS signal.
2. Press the power button to turn Receiver On.
After displaying the SIRIUS logo, the Receiver
will update the SIRIUS channel line up. The
display will show, “UPDATING CHANNELS”
and show the status of the update.
X% Completed
Updating Channels
Wait until the channel updates have completed
before pressing any buttons on the Receiver.
3. Once the channels have been updated, the
display will change to “Call 1-888-539-SIRIUS
to Subscribe” and will place you in SIRIUS
Satellite Radio’s Preview Channel, channel
184.