Filter
Top Products
SIR-GTRC1 Streamer GTR User and Installation Guide
8
Be sure the large tab on the mounting plate is
facing up.
If you are using the velcro strip for mounting, attach
the velcro strip to the back of the mounting plate.
Route the cables through the mounting plate
underneath the tabs as shown. The cables may be
routed across the mounting plate, or routed down to
exit at the bottom.
Place the Receiver into the mounting plate by first
placing the bottom of the Receiver into the tabs
at the bottom of the mounting plate (1), and then
pivoting the top of the receiver into the mounting
plate until it snaps into place (2).
1
2
If you are using the suction cup mount, attach the
suction cup mount to the vehicle windshield, or 10.8