SIR-GTRC1 Streamer GTR User and Installation Guide
54
“Signal Indicator”, and press the select button.
Signal Indicator
SAT - +SAT - +
TER - +TER - +
2. Two 10 segment horizontal bar graphs will be
displayed with a - sign to the left and a + sign
to the right. SAT indicates the satellite signal
strength while TER indicates the terrestrial
signal strength, if a terrestrial signal is available.
To exit the Signal Indicator menu, press the
MENU
button.
Factory Default
The Factory Default option will restore most every
feature of the Receiver to the original factory
settings. The following is a list of all features
affected by the Factory Default option:
• All Presets are cleared
• All Game Alerts are cleared
• Receiver set to Normal Tuning Mode
• Display brightness set to 50%
• Display Contrast set to 50%
• FM Transmitter set to On
• FM Frequency set to 88.1 MHz
• All S-Seek memory cleared
• Clock set to 12-Hour Format
• Time Zone set to Eastern Standard Time
• Daylight Savings Time set to Observed
• Auto Shutdown set to Off
• Sleep Mode set to Off
• Auto Select set to Off
• Program Alert cleared
Note that the Parental Control feature is not
affected by the Factory Default option. If a code
has been set for the Parental Control feature,
the code will not be reset by the Factory Default
feature, preventing someone from circumventing
the Parental Control feature. Channels which have
been locked will remain locked.
To activate the Factory Default feature, and restore
the features of the Receiver to the factory defaults,
do the following:
1. Use the channel up and down buttons to
highlight “Factory Default”, and press the select
button.