Filter
Top Products
12
1. If installed in your vehicle, turn vehicle ignition to ACC (accessory) or Start the engine. CIOtv will operate
in the ACC position but may deplete your vehicle battery unless the engine is running.
2. Press the POWER button on the upper top left corner of CIOtv. The Winegard logo will briefly appear and the
CIOtv Home Screen will start. This should take about 20-25 seconds. You are now ready to operate your CIOtv.
To shut off power, press the power button again. Note: When power is available to CIOtv, the POWER button
will softly glow in the power-off mode. When the POWER button is activated and CIOtv is running, the POWER
button will increase in brightness indicating power-on.
3. Next select your audio option. You can do this through either the Setup Menu or via the icons at the top of
the CIOtv Home Screen.
Note: Do not touch the CIOtv touchscreen during the boot up
process as the screen calibration may be affected. If your CIOtv
touchscreen controls fail to operate properly, shut the system
down and reboot without touching the screen.
!