5900335 © 2005 JCM-American Corporation
3-3
DESIGN Optipay™ CC Section 3
Product Labels
The Coin Validator’s Side Product Label
((See Figure 3-1 [11] and Figure 3-4) contains all
the device defining data, such as the device type
and series, and the data programmed according to
customer specifications such as their currency and
relative country’s coin type requirements listed in
Table 3-1.
The Front Product Label (See Figure 3-1 [5] and
Figure 3-5) contains similar information as the side
label with additional content regarding safety and
relative country’s coin age denomination require-
ments listed in Table 3-2.
The Payout Unit
The Payout Unit consists of the four tube cassette
and the payout set. The device is equipped with
filling level sensors and tube counters to monitor
each tube cassette’s inventory.
Tube Cassette
The Tube Cassette (See Figure 3-1 [6] and Figure
3-6 [1]) incorporates four change tubes with
different diameters for collecting four user coin
types, available for vending to a customer. A
sticker located at the top of the Tube Cassette iden-
tifies which tube accepts a particular denomination
coin value.
The tube coin storage capacity depends on the
thickness of each coin type (example: approxi-
mately 87 U.S. 25
¢
coins can fill a tube), See Table
3-3 for a listing of the U.S. coin values and quanti-
ties allowed per tube.
The Coin Validator tests whether an accepted coin
should be sorted into one of the four tubes, or be
directed to the Cash Box according to customer
programming.
Table 3-1 Side Label Features
1. Data block number 2. Order number
(6 digit)
3. Device part number 4. Serial device
number per order
number (3 digit)
5. Barcode 6. Certified European
mark
7. Date of
manufacture (4
digit)
8. Nominal Voltage
9. Ordering code
(8 digit)
10. Product Trade
Marked name
Figure 3-4 Coin Validator Side Label
Figure 3-5 Coin Validator Front Label
Table 3-2 Front Label Features
1. Country flag,
country code and
currency/coin type
requirements
2. Order number
(6 digit)
3. Nominal voltage &
Interface
4. Serial device
number per order
number (3 digit)
5. Product name 6. Safety tested
certification logo
7. Barcode 8. Certified European
mark
9. Date of
manufacture (4
digit)
10. Data block number
11. Ordering code
(8 digit)
12. Device part number
Table 3-3 U.S. Coin Cassette Capacity
Coin
Value
Thick
-ness
(cm)
N
o
. of Coins
@ 100%
Sensor Level
Empty
@
50%
@
75%
0.5 1.87 78 10 39 59
0.10 1.3 112 14 56 85
0.25 1.67 87 11 44 66
1.00 2.0 73 9 36 55
