5900335 © 2005 JCM-American Corporation
12-4
Section 12 Optipay™ CC PALM PILOT® USAGE
12. The “
Other settings”
configurations.
a). Select the
Other settings…
mode on the
menu screen and the following
selections will appear:
•
Smallest coin value:
– Reference value
for all coin values programmed. All coin
values to be accepted must be a multiple
of the smallest coin value
(See Figure 12-12).
•
Telephone code:
–
and
Currency code:
– These codes are used
in combination to set the Vending
Machine’s language and currency type.
•
MDB feature level
: –
–
Level 3
– The changer controls all
payout functions
–
Level 2
– The vending VMC controls
all payout functions
•
Wake up time:
– External input enable
signal for use with battery powered
units.
•
String sensitivity:
– “
0
” is the
minimum sensitivity level setting. “
49
”
is the maximum sensitivity level setting.
b). Make value changes by using the related
Up/Down menu triangular arrows to set
the desired value and select
Send .
11. Cloning configuration settings.
a). Click on the menu bar and select
Clone setting data
(See Figure 12-13 a).
b). To record the Coin Changer’s settings,
select
Read out
from the
menu that appears, then select the
desired record number (See Figure 12-13
b-to-c) in the menu that
appears.
c). To program the settings into a new Coin
Changer, select
Send
(See Figure 12-13
c) or
Back
to reset to Step “b” and
d). Select the appropriate
Record 1 or
Record 2
button (See Figure 12-13 d).
Changer Service, Token Programming,
and Currency Conversion
1. Changer payout set & tube counter editing.
Figure 12-11 Recycler Mode
a
Figure 12-12 Other Settings Mode
Select the desired options and click
Send to program the Changer.
NOTE: The Telephone Code is initially set
to “01” and the Currency Code is initially
set to “9001”.
Figure 12-13 Clone Mode
b
d
c
a
Figure 12-14 Service Mode
a
c
d
f
b
e
