5900335 © 2005 JCM-American Corporation
6-1
Optipay
™
CC
A-66 Coin Changer
Section 6
6 ENERGIZING
This section provides energizing (power-up)
instructions for the Optipay™ CC A-66 Coin
Changer.
Although the individual functions of the A-66 Coin
Changer are pre-programmed by the manufacturer
to customer specifications, the first time the device
is activated, the four Tube Cassette change tubes
must be filled with relevant coin types.
To begin the energizing process:
1. Press the Plus key (See Figure 6-1 [4]).
An audible signal will sound and the Green
LED (See Figure 6-1 [1]) will begin flashing
indicating that the Coin Changer is no longer
in a standard operating mode and has now
entered the filling level mode.
2. Insert the coin tubes.
The Coin Validator’s tube counter meters in
the accepted coins, and the Coin Changer
sorts the corresponding coin type into its pre-
configured tube until either:
–
The full sensor is covered, or
–
The maximum coin number is configured,
or
–
The float level is reached.
If the “float” function is active, tube coins
inserted thereafter will not be accepted and
will be directed to the return area tray.
Otherwise, they will be accepted and directed
to the Cash Box.
If all the coin tubes are full:
3. Press the Plus key again.
Two audible signals will sound and the Green
LED will light constantly indicating that the
Coin Changer is no longer in the filling level
mode and has returned to the operating mode.
In many cases the Vending Machine’s
controls will offer a filling function. In this
case they should be used, because the
control unit might not accept the filling level
capacity of the Coin Changer.
If the Cash Box contains coins, it must be
emptied, otherwise new coins directed to
the Cash Box will not be counted.
Figure 6-1 Coin Validator Keyboard
If no coins are inserted in a 30 second time
period, the Coin Changer will automatically
return to the operating mode, without
having to press the Plus
key a second
time.
