5900335 © 2005 JCM-American Corporation
12-5
PALM PILOT® USAGE Optipay™ CC Section 12
a). Select the
Service
tab on the main menu
screen (See Figure 12-14 a), and then
b). Select
Payout set
on the menu
that appears to view the coin levels in each
tube (See Figure 12-14 b). Click on the
related
L ML MR R
tube
position tab to perform a payout test on the
respective tube (See Figure 12-14 c).
c). To edit the counter, click
Edit counter
(See Figure 12-14 d) and
d). Adjust levels using the respective “up”
and “down” pointing triangular arrow
(See Figure 12-14 e).
l). Click
Send
to program the Coin Changer
(See Figure 12-14 f).
2. Viewing the “Filling Levels”.
a). Select the
Service
tab on the main menu
screen (See Figure 12-15 a); then
b). Select
Filling levels
to view the coin
level bargraphs, count, each tube’s total
coin value and the entire Tube Cassette’s
total monitory value.
2. Teaching new coins & tokens.
a). Select
Teach token
on the
menu screen (See Figure 12-16 a -b), then
b). Select the desired channel to program the
chosen token (See Figure 12-16 c).
c). From the screen select a new
token to program (i.e.,
Teach
) or one to
change that has already been programmed
into the Coin Changer memory (i.e.,
Change code
).
d). While in the “Teach Token” mode insert a
minimum
of 10 coins to program tokens
into the Coin Changer’s memory
(See Figure 12-17 d).
e). Select
Continue
on the
menu screen within the menu
revealing a third
menu (See Figure 12-17 e).
f). Select either
Normal
or
Wide
accep-
tance parameters (See Figure 12-17 f);
then
g). Select
OK
in the
menu that appears (See Figure 12-17 g).
c). Select the appropriate func-
tion tab (e.g.,
Vend token
,
Reject token
or
Value token
) to complete token pro-
gramming within the menu.
Figure 12-15 Filling Levels Mode
a
b
Figure 12-16 Teach Tokens Mode
a
b
c
Figure 12-17 Token Programming Mode
d
e
f
g
h
