5900335 © 2005 JCM-American Corporation
1-1
Optipay
™
CC
A-66 Coin Changer
Section 1
1 GENERAL INFORMATION
This section provides a general overview of the
advantages and options of the Optipay™ CC A-66
Coin Changer. This first section is designed to help
you navigate through this manual with ease.
General Information
This manual describes the design, operation and
functional range of the A-66 Coin Changer (See
Figure 1-1 ). Sections 5, 6 and 7 explain the steps
necessary towards installation, energizing and
operation of the coin changer.
Chapters 8 to 11 describe how the Coin Changer is
cleaned, transported and electronically configured.
The section entitled “Configuration” deals prima-
rily with the use of a Palm Pilot
®
to configure Coin
Changer. The JCM WinEMP
©
, PalmA66
©
and
PalmEMP
©
configuration programs are described
separately in the software instructions of section
11.
The appended "Index", "Setting Module Func-
tional Overview", and "Trouble Shooting" sections
reduce the search for specific explanations and
additional help when required.
To make operation of this device and navigation
within this manual easier, the following illustra-
tions were used within the text:
•
Safety instructions, which need to be
observed in order to protect the operators and
equipment, have been written in bold text and
have been given the pictographs:
•
Special Notes, which effect the use of the Coin
Changer have been written in italic text and
have been given the pictograph:
•
Steps, requiring the operator to perform
specific actions are given sequential numbers
(1., 2., 3., etc.).
Figure 1-1 Optipay™ CC A-66 Coin Changer
ID = A66Frontmono.jpg
