The current configuration is now input 5 video and audio tied to output 3, output 4,
and output 6 (see figure 12).
Input
Output
3
4
6
5
Video
Audio
Figure 12. Example 1, final configuration
Example 2: Adding a tie to a set of computer video and audio ties
In the following example, a new video tie is added to the current configuration. The steps
show the front panel indications that result from your action.
NOTE: This example assumes that you have performed example 1.
1. Clear all selections: Press and release the Esc button. The LED ashes once.
2. Select video only for the tie: If necessary, press and release the Video button and the
Audio button.
VIDEO AUDIO
I/O
Press the Video button to toggle on and off.
The LED lights when selected.
Press the Audio button to toggle on and off.
The LED is unlit when deselected.
3. Select an input: Press and release the input 5 button.
2 3 4 5 6 7
COMPUTER INPUTS
1 2 3 4 5 6
COMPUTER/AUDIO OUTPUTS
The Computer/Audio Output 3, Output 4, and Output 6 LEDs
light to indicate the computer video ties created in example 1.
Press and release the Computer Input 5 button.
The LED lights.
4. Select the output: Press and release the output 1 button.
1 2 3 4 5 6
COMPUTER/AUDIO OUTPUTS
PRESETENTER
Press and release the Computer/Audio Output 1 button.
The LED blinks to indicate that the selected computer
video input will be tied to this output.
The Enter LED blinks
to indicate the need to
confirm the change.
MPX 866 A Media Presentation Matrix Switcher • Operation 26
