A SERVICE OF

logo

Performing Soft System Resets (Modes 3, 4, and 5)
Perform a soft reset of the switcher as follows:
1. Use an Extron Tweeker or other small screwdriver to press and hold the rear panel Reset
button (see gure 22) until the rear panel Reset LED and the front panel Preset and View
buttons blink once (events reset), twice (IP settings reset), or three times (absolute reset).
2. Release the Reset button and then immediately press and release the Reset button
again. Nothing happens if the second momentary press does not occur within 1 second.
RESET
LAN
CT
LINK
RESET
LAN
CT
LINK
RESET
LAN
CT
LINK
Events
Reset
Press and hold
the Reset button.
Release, then
immediately
press and hold.
3 seconds
Reset LED
flashes once.
Release the
Reset button.
Reset LED
flashes three
times.
IP Settings
Reset
Press and hold
the Reset button.
Release, then
immediately
press and hold.
6 seconds
Reset LED
flashes twice.
Release the
Reset button.
Reset LED
flashes three
times.
Absolute
Reset
Press and hold
the Reset button.
Release, then
immediately
press and hold.
9 seconds
Reset LED
flashes three
times.
Release the
Reset button.
Reset LED
flashes three
times.
Figure 22. Soft System Resets
MPX 866 A Media Presentation Matrix Switcher • Operation 52