A SERVICE OF

logo

Section 8: Adjustment Procedures
SATO M10e Service Manual PN: 9001113A Page 8-4
9 Manipulate adjustment collar (7) and ribbon guide while observing the ribbon results.
10 Retighten set screw (6) while holding ribbon guide in place.
11 Install tear-off plate (2) as applicable and front housing cover (1).
Figure 8-3, Ribbon Wrinkle Adjustments
NOTE: Facing the collar is a scale to assist in incremental adjustment.
NOTE: The ribbon guide has an orifice just below the set screw to assist in
holding it in place while the set screw is tightened. It is recommended that an
allen wrench be inserted for this activity.
2
5
7
6
1
4
3