A SERVICE OF

logo

Section 6: Troubleshooting
SATO M10e Service Manual PN: 9001113A Page 6-14
8 Press and hold the FEED key while switching on the printer.
9 Release the FEED key when the printer emits an audible beep.
10 Press the ENTER key to select and advance to the next display.
11 Press the ENTER key again and ensure that the test print operation can function normally.
NOTE: Figure 10-3 of the Diagrams & Schematics section provides guidance
on ribbon installation.
LCD DISPLAY: TEST PRINT MODE
CONFIGURATION
LCD DISPLAY: TEST PRINT SIZE
26CM