A SERVICE OF

logo

Section 7: Replacement Procedures
SATO M10e Service Manual PN 9001113A Page 7-5
Figure 7-4, Platen Roller Replacement
6 Manipulate platen roller (2) through slot on right side of printer frame (5). Lift away roller (2).
7 Insert replacement platen roller (2) through the slot on right side of printer frame (5).
8 Allow bushings on each end of platen roller (2) to nest in printer frame (5).
9 Secure the assembly with clamps (4) and screws (3).
10 Apply timing belt (1) onto its pulleys and adjust its tension.
11 Reconnect power supply cord, test cycle, and reattach/close all covers.
NOTE: A properly nested platen roller will spin freely.
NOTE: Timing belt replacement and adjustment procedures may be found in
their respective sections of this manual.
1
4
2
5
3
4
3