14-EN
Playback
Only IVA-C801 has a built-in CD player.
When an optional Alpine CD player or CD changer is
connected, you can control it from the head unit. This
section describes operation assuming that an Alpine
CD player/Changer is connected to the IVA-C801/
CVA-1006.
(When a CD changer is connected, see page 17 to
select your desired disc.)
IVA-C801 CVA-1006
built-in CD \ ×
Slave CD player Option Option
CD Changer Option Option
1 Press the SOURCE button to display the main
menu screen.
2 Rotate the rotary encoder and select the CD
player mode. Then, press the rotary encoder to
execute the selection.
The display shows the CD player mode screen.
When a CD is inserted into the CD SLOT of the
IVA-C801, with the label side facing up, the unit
starts to play the CD.
CVA-1006:
When an optional Alpine CD player is connected,
inserting an CD into the optional CD player starts
playback automatically.
3 To temporarily pause playing, press the 2 (:/J)
button.
To resume play, press the 2 (:/J) button for a
second time.
4 Press the eject (c) button when you want to
eject the CD. (If you use an optional CD player,
press the eject button on the optional CD player.)
NOTES (IVA-C801 only)
• Three-inch (8 cm) CD's can be used.
• Only compact discs containing the mark shown can be
used.
• We cannot fully guarantee the playback of CD-R (CD-
Recordable). You cannot playback CD-RW (CD-
ReWritable) on this unit.
• Be sure to turn the ignition key to the ACC or ON
position before inserting an CD. Otherwise it may
cause damage to the player.
Fast Forward and Backward
1 Press and hold the 3 (f) or 1 (g) button
to quickly move forward or backward respectively
to reach the desired music section on the disc.
Release the button when the desired section is
reached.
2
SOURCE
Rotary encoder
c
(IVA-C801)
SOURCE
Rotary encoder
13456 213456
(CVA-1006)
CD player Operation (IVA-C801 only)
(CVA-1006.....optional)