Filter
Top Products
44-EN
Selecting Rear Monitor
If a rear-seat monitor and a navigation system are
connected to the IVA-C801/CVA-1006, you can
switch the picture/sound of the rear-seat monitor
from the IVA-C801/CVA-1006.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1 Press the SOURCE button.
The main menu appears on the display.
2 Press the 6 (SETUP) button.
The Setup mode screen appears.
3 Rotate the rotary encoder and select "AUX
OUT."
The Function Guide is displayed.
4 Press the 1 (NAV.) button, the navigation
screen will be displayed and the voice guidance
will be produced on the rear-seat monitor if the
navigation system is connected.
• When the 2 (AUX1) button is pressed, the
picture/sound of the device connected to
Terminal AUX 1 will be played on the rear-seat
monitor.
• When the 3 (AUX2) button is pressed, the
picture/sound of the device connected to
Terminal AUX 2 will be played on the rear-seat
monitor.
Other Useful Features
NOTES
• If the DVD player or DVD changer is connected to the
AUX1 terminal . The DVD picture appears by
performing steps 1 and 2 of "Playing 2 Sources
Simultaneously" on page 51. Then, perform steps 1 to
4 on this page so the DVD picture and sound are
output.
• To deactivate the mode, press the same
button.
• If no particular picture is selected for the rear-seat
monitor in the AUX OUT mode, the rear-seat monitor
displays the same picture as for the IVA-C801/CVA-
1006.
• After carrying out the steps 1 to 3 of "To display the
Setup mode screen" described on page 40, perform the
operation show below.
(IVA-C801)
(CVA-1006)
Rotary encoder Rotary encoder
1
1
6
6
23
SOURCE
FUNC
23
FUNC
SOURCE
4
4